Monoprice 5-inch Powered Studio Monitor Speakers (pair) 605500 Speaker NEW Product Features >Every studio, be it a professional recording studio or just a home studio, needs a good set of monitor speakers, with a flat frequency response so you’ll be able to hear exactly what the recording will sound like. If this describes your own needs, then you must get a pair of these 5-inch Powered Studio Monitor Speakers from Monoprice! These speakers are professional quality studio monitors, designed to produce a flat frequency response for studio recording, mixing, and mastering duties. Each speaker is one after the other powered, is bi-amped with two dedicated amplifiers, and uses both balanced XLR and balanced/unbalanced TRS/TS audio input paths. The tweeter is a 1″ silk dome design with magnetic shielding for a flat frequency response and accurate musical reproduction. The woofer is a 5″ Kevlar cone with magnetic shielding, rubber surround, and a high-temperature voice coil, for long hours of high volume work. Each monitor enclosure includes two separate power amplifiers totaling 70 watts of music power. A 30 watt amplifier is used to drive the tweeter, even as a 40 watt amp drives the woofer. This use of dual amplifiers ensures that each driver has the power it needs without compromising the output of the other driver, ensuring that the audio output remains crisp, clean, loud, and distortion free all the time. A four-position selector switch on the back of each speaker permits you to adjust the high-frequency bias, with either a -2dB, -1dB, Flat, or +1dB shelving of frequencies above 2000 Hz. The purpose of this circuitry is to adjust the high-frequency response to the characteristics of the room being used. In a “bright” musical environment, an attenuation of the high frequencies is needed to produce a flat frequency response, even as a more sound absorbant environment may require a boost of the high-frequencies to reach a flat overall response. USB cable not included. Included in the Package: * 2x 8-inch powered studio monitor speakers * 2x AC power cord (IEC 60320 C13 to NEMA 5-15) * 1x User’s manual Specifications Details Speaker Type 2-way Near-Field Studio Reference Monitor Speakers LF Amplifier 40 watts continuous HF Amplifier 30 watts continuous Input Connections 1 XLR connector for balanced connections and 1 TRS connector for balanced and unbalanced TRS and TS connections Input Impedance 10K ohms unbalanced, 20K ohms balanced Sensitivity 90dBA output SPL at 1 meter with 85mV pink noise input Woofers 5″ Kevlar cone with high-temperature voice coil and magnetic shielding Tweeters 1″ silk dome with magnetic shielding Frequency Response 56Hz to 22KHz Crossover Frequency 3000Hz S/N Ratio > 100dB (typical, A-weighted) HF Level Switchable, -2dB, -1dB, Flat, or +1dB boost to frequencies above 2000 Hz Power Requirements 100-120 VAC, 50/60Hz Power Cable IEC 60320 C13 to NEMA 5-15 Dimensions (HxWxD) 10.0″ x 6.9″ x 7.8″ (254 x 176 x 198 mm) each Weight 9.7 lbs (4.4 Kg) each **Disclaimer: Electronic Products are designed for USA only, please check the voltage requirements before buying for any other country, we would not take responsibility for any malfunction because of voltage issues. Take a look at my other items! Make sure to add me to your favourites list!